420CT

This is the hydraulic drive motor Gearbox Oil Plug for CASE 420CT Track Loaders. This Gearbox Oil Plug is for the rear cover. There are three of them total on this Hydraulic motor.Used in Rexroth motor #'s 87447234, 87600262, 87600263, 87355890

This is the hydraulic drive motor Face Seal O-Rings for CASE 420CT Track Loaders. These Face Seal O-Rings go with the Metal Face seals, if you are re-surfacing the metal seals yourself these are what you need. If you need the whole kit we carry that...

This is the hydraulic Final Drive Seal Kit for CASE 420CT Track Loaders. See the technical specs tap for all seals included in this kit. This kit does not include the large face seal O-rings, Piston rings and Distributor Seals.Please call if you have any...

This is the hydraulic drive motor Assembly Nut for CASE 420CT Track Loaders. If your drive motor Nut has been damaged or you needed to cut it off this is your answer. Manufactured in the USA out of Pre-Hardened steel. This drive motor can be a pain to...

This is the hydraulic drive motor Gearbox Rebuild Kit for CASE 420CT Track Loaders. This Kit includes everything to rebuild your gearbox end of your motor. Two main bearings, two Duo Cone Face Seals with O-Rings, 3 gear oil plugs and 2 rear cover O-rings...

This is the hydraulic drive motor 3mm Gearbox Cover O-ring for CASE 420CT Track Loaders. This 3mm Gearbox Cover O-ring seals the rear cover on the gearbox side of your motor. We also carry the main bearings or full rebuild kit for the gearbox. Replaces...

Reman Drive Motor Brake Assembly for CASE 420CT Track Loader. This is a good brake pack with both brake pistons with good seals. Motor part Number 47923177. Please call if you have any questions, we also offer other parts for this hydraulic motor.

NOTICE:Reman units must be ordered by phone - Many pumps and motors are in stock but we want the best process for you including freight options, possible lead times and some requirements for having your core first. Purchase your Remanufactured Case 420CT...

This is the hydraulic drive motor Face Seal Set for CASE 420CT Track Loaders. These Face Seal Set keep your gear oil in your unit. Once dirt and sand wear into the seal your gear oil will leak out and the bearings will go out very shortly. If this...

This is the hydraulic drive motor 2mm Gearbox Cover O-ring for CASE 420CT Track Loaders. This 2mm Gearbox Cover O-ring seals the rear cover on the gearbox side of your motor. We also carry the main bearings or full rebuild kit for the gearbox. Replaces...

Purchase your Case 420CT Hydraulic Drive Motor today! This is the Bonfiglioli version motor with the later serial breaks. Part Number 47923177, 84586919 and 87588897. This is also at times referred to as the Final Drive Motor. We also offer pump...

Thank you for your interest in our Rubber Track (320mm) for CASE 420CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.VPI Link : 50, VPI Pitch : 86, VPI Width : B320