445CT

This is the hydraulic drive motor Gearbox Rebuild Kit for CASE 445CT Track Loaders. This Kit includes everything to rebuild your gearbox end of your motor. Two main bearings, two Duo Cone Face Seals with O-Rings, 3 gear oil plugs and 2 rear cover O-rings...

This is the hydraulic drive motor 3mm Gearbox Cover O-ring for CASE 445CT Track Loaders. This 3mm Gearbox Cover O-ring seals the rear cover on the gearbox side of your motor. We also carry the main bearings or full rebuild kit for the gearbox. Replaces...

Reman Drive Motor Brake Assembly for CASE 445CT Track Loader. This is a good brake pack with both brake pistons with good seals. Motor part Number 47923177. Please call if you have any questions, we also offer other parts for this hydraulic motor.

NOTICE:Reman units must be ordered by phone - Many pumps and motors are in stock but we want the best process for you including freight options, possible lead times and some requirements for having your core first. Purchase your Remanufactured Case 445CT...

Thank you for your interest in our Rubber Track (400mm) for CASE 445CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.VPI Link : 55, VPI Pitch : 86, VPI Width : B400

Thank you for your interest in our Front Idler for CASE 445CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.

This is the hydraulic drive motor Assembly Nut for CASE 445CT Track Loaders. If your drive motor Nut has been damaged or you needed to cut it off this is your answer. Manufactured in the USA out of Pre-Hardened steel. This drive motor can be a pain...

This is the hydraulic drive motor Face Seal Set for CASE 445CT Track Loaders. These Face Seal Set keep your gear oil in your unit. Once dirt and sand wear into the seal your gear oil will leak out and the bearings will go out very shortly. If this...

Thank you for your interest in our Bottom Roller for CASE 445CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.

Thank you for your interest in our Rear Idler for CASE 445CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.

This is the hydraulic drive motor 2mm Gearbox Cover O-ring for CASE 445CT Track Loaders. This 2mm Gearbox Cover O-ring seals the rear cover on the gearbox side of your motor. We also carry the main bearings or full rebuild kit for the gearbox. Replaces...

Thank you for your interest in our Drive Sprocket for CASE 445CT Track Loaders. Save valuable downtime by replacing parts on both sides of your machine today as they most likely have the same wear.Drive Sprocket