Thank you for your interest in ourCAT 247BDrive Motor. This motor is for Repair and Return only, you must send your drive motor into our shop to have it repaired.Cost is approximately $1850.00. This covers motor part numbers 0702-335, 0702-640. Repairs...

Thank you for your interest in ourCAT 247 Drive Motor. This motor is for Repair and Return only, you must send your drive motor into our shop to have it repaired.Cost is approximately $1850.00. This covers motor part numbers 0702-335, 0702-640. Repairs...

This is the hydraulic Final Drive Seal Kit for John Deere 333D Track Loaders. See the technical specs tab for all seals included in this kit. This kit does not include the large face seal O-rings, Piston rings and Distributor Seals.Please call if you...

These are the hydraulic drive motor Assembly Nut for John Deere 333D Track Loaders. If your drive motor Nut has been damaged or you needed to cut it off this is your answer. Manufactured in the USA out of Pre-Hardened steel. This drive motor can be a...

This is the hydraulic Final Drive Planet Gear Bearing for John Deere 333D Track Loaders. Be aware that many times this is a symptom of larger problems inside the planet housing such as worn bearings causing side load on your gears. It is vital that you...

This is a complete set of Planet Gears and the Sun gear including new Bearings for John Deere 333D Track Loaders. In the case that you have a worn gears on your motor, this is your answer. Be aware that many times this is a symptom of larger problems...

This is the hydraulic Final Drive Planet Gear for John Deere 333D Track Loaders. In the case that you have a broken gear on your motor, this is your answer. Be aware that many times this is a symptom of larger problems inside the planet housing such as...

This is the hydraulic Final Drive Sun Gear for John Deere 333D Track Loaders. In the case that you have stripped out your drive gear on your motor, this is your answer. Be aware that many times this is a symptom of larger problems inside the planet...

This is the hydraulic drive motor Gearbox Rebuild Kit for John Deere 333D Track Loaders. This Kit includes everything to rebuild your gearbox end of your motor. Two main bearings, two Duo Cone Face Seals with O-Rings, 3 gear oil plugs and 2 rear cover...

This is the hydraulic drive motor Face Seal Set for John Deere 333D Track Loaders. These Face Seal Set keep your gear oil in your unit. Once dirt and sand wear into the seal your gear oil will leak out and the bearings will go out very shortly. If...

These are the hydraulic drive motor Face Seal O-Rings for John Deere 333D Track Loaders. These Face Seal O-Rings go with the Metal Face seals, if you are re-surfacing the metal seals yourself these are what you need. If you need the whole kit we...

This is the hydraulic drive motor Gearbox Oil Plug for John Deere 333D Track Loaders. This Gearbox Oil Plug is for the rear cover. There are three of them total on this Hydraulic motor. For application in Rexroth motors, older serial breaks.